Self-Inking Stamps

SI-41 Justrite Metal Self-inker for RIBtype
   - 9 Ribs x 2-1/16"

• Approx 1-1/4" X 2-1/16" area for RIBtype 

• Has 9 ribs

• Heavy duty metal self-inker
• Comes with Dry muslin felt ink pad so that you can use the ink best for your application  (replacement ink pads)
  
• Use RIBtype letters, numbers, and custom type to build your own messages and change them as needed,

Self-inkers eliminate the need for a separate ink pad, making your stamp application even easier.

Recommended for marking flat surfaces. Place the metal frame on the marking surface where you wish to print, apply pressure on the handle (push down) to rotate the die plate so that it comes in contact with your printing surface.  See demo.

Note on inks for self-inkers:

• Works best with porous inks (for uncoated paper, corrugated, kraft bags, etc.) that dry by absorption
• If you require a non-porous ink (for marking metals, plastic, etc.), choose your ink carefully. Non-porous inks dry by evaporation and will dry in the ink pad more quickly because the ink pad is continuously exposed to the air. Slower drying inks are the best choice. Pad maintenance and more frequent pad replacement are necessary with non-porous inks.
• Pads and replacement pads come dry so that you can choose the ink that is best for your application.